-
House # kha-199/3 & 4 (Venus Complex)
Middle Badda, Dhaka-1212
House # kha-199/3 & 4 (Venus Complex)
A distribution transformer or service transformer is a transformer that provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in the distribution lines to the level used by the customer.
Megastar Bangladesh Ltd supply and maintain various types of Distribution & Auto transformer for all over Bangladesh.
DetailsIn an electric power system, switchgear is the combination of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment. Switchgear is used both to de-energize equipment to allow work to be done and to clear faults downstream.
Megastar manufacture, supply and maintenance of HT Switchgear for rated voltages of 6.6 to 36 kV, with rated short-circuit breaking capacities from 25 to 40 kA.
Details
Megastar Power Factor Improvement Plant (PFI) conforming to IEC-439-2, VCK, DIN & ANSI standards is of sheet steel clad, dust & vermin proof, free standing, floor mounting indoor type. The centrally controlled automatic PFl plant is of compact design and suitable for operation in 6/9/12 steps in the system for automatic control of the reactive power.
Megastar Bnagladesh Ltd. conforming to IEC VCK, DIN & ANSI standards is of sheet steel clad, dust & vermin proof, free standing, floor mounting indoor type PFI....
DetailsCT:PT Combined unit are also called metering units. These units can be offered as Dry Type or Oil Immersed and are generally pole mounted. The units are available in three phase three wire or three phase four wire system. CT: PT unit used for single or double metering with trivector meter and energy meter.
Current transformers are used for metering and measurement purposes. High line current can be stepped down for measuring devices and relays. Relays continuously ...
Details
A lightning arrester is a device used on electrical power systems and telecommunications systems to protect the insulation and conductors of the system from the damaging effects of lightning. The typical lightning arrester has a high-voltage terminal and a ground terminal.
The areas under the protection of lightning rods are identified according to the “lightning risk calculation” carried out for the facility to be protected. As a result of the analysis, the radius of the lightning rod coverage is 79m in areas with risk level 1, which can increase up to 107m in an area with risk level 3.
Details